人気ゲーム機が1円!楽天
Amazon送料無料
↓拍手もしていただけるとありがたいです↓
またまた、パクリ品が登場しました。
16 - 2 – 2012
JB2USB Usage
JB2USB Update
System Update
Install Software
Introduction
Unlock the true potential of your PS3 with JB2USB – keep your PS3 on a homebrew enabled custom firmware, while at the same time enjoying the newest and most popular PS3 games.
JB2USB Usage
JB2USB Identify：
Before you may use JB2USB, you must first install our 3.55-Dongle custom firmware onto your PS3.
Step1. Insert JB2USB into one of the USB ports on your PS3 and power the system up.
Step2. The red LED will light on during the process of PS3 start up. If the JB2USB is identified by PS3, the red LED turn off and the green LED light on; or the red LED light flicker, you must restart your PS3 in this situation.
Note. Do not remove the JB2USB at any point while the PS3 is running
.
Blue-ray Disc Game:
Insert disc into PS3, the game will auto start.
HDD Game：
Before you may run HDD games, you must first install MutliMAN.
Step1. Insert USBHDD into one of the USB ports on your PS3,
Step2. Select (game -> MultiMAN) to run MultiMAN,
Step3. Press R1 in MultiMAN’s XMB interface, all games in USBHDD will be displayed.
Step4. Load one game you want, PS3 will back to PS3’s XMB interface automatically. At this time menu (game) -> (app_home/PS3_GAME/) is the entry of the loaded game.
Step5. Select (game) -> (app_home/PS3_GAME/) the game will start up
JB2USB Update
When there is a new firmware of JB2USB, you should update your JB2USB.
The JB2USB is not only a Dongle of PS3, but also a mass storage device When insert JB2USB into your PC. You can only write data into this mass storage device. The update process includes two stages: file copy and firmware self update.
Step1. Insert JB2USB into one of the USB ports on your PC, a removable device will be enumerated by PC, the name of the device is “JB2USB”. The red LED light on.
Step2. Copy update file into the removable device “JB2USB”. The red LED light flicker until the copy is completed.
Step3. After the entire update file are written into “JB2USB”, the self firmware update start, at this time, both the red and the green LED are light on. The removable device will be uninstalled simultaneously.
Step4. The red LED turns off and only the green LED light on after the update process is completed.
Notes: Insert JB2USB into PC will not display the update file in the removable device.
System update
Once you have confirmed that you have obtained the correct updater file, proceed with the update as follows:
Step1. Obtain a USB storage device such as a USB HDD or USB flash memory stick,
Step2. Create a folder on the storage device in which to save the update file. Using a PC, create a folder named “PS3” on the storage device. Within the PS3 folder, create a folder named "UPDATE",
Step3. Copy the PS3UPDAT.PUP file to the “UPDATE” folder created in step 2. Thus, you will have this path structure on your USB storage device: \PS3\UPDATE\PS3UPDAT.PUP,
Step4. Boot your PS3 and insert the USB storage device into the PS3,
Setp5. From the home menu, select (Settings) ‐> (System Update) ‐> (Update via Storage Media),
Step6. The PS3 will notify you that the “3.55‐Dongle” update was found. Select OK then follow the onscreen instructions to complete the update,
Step7. After the update has completed, your PS3 will restart and you now be running the 3.55 custom firmware. You may now enjoy the use of the JB2USB.
(NOTE: The above procedure is only applicable to PS3’s on or below system software v3.55)
Install Software
Step1. Obtain a USB storage device such as a USB HDD or USB flash memory stick,
Step2. Copy the MultiMan_02.xx.xx file to the root directory of USB device. Thus, you will have this path structure on your USB storage device: \MultiMan_02.xx.xx,
Step3. Boot your PS3 and insert the USB storage device into the PS3,
Step4. From the home menu, Select (game) -> (Install Package Files)
Step5. The PS3 will display all software in root directory of USB device. Select install MultiMan_02.xx.xx into you HDD.
Step6. After the install completed, the icon of MultiMAN will display at (game) -> (MultiMAN).
使い方は、Tbと同じようです。
今後何か独自のものがあればいいなと、思います。
http://www.jb2usb.com/?c=news
↓ブログ存続のためクリックよろしくお願いします↓
人気ゲーム機が1円!楽天
Amazon送料無料
↓拍手もしていただけるとありがたいです↓
